Installation Chapter 5
RADWIN 2000 User Manual Release 2.6.40 5-29
To set the Hot Standby Mode:
1. Click the Hot Standby tab. The following dialog appears:
Figure 5-25: Choosing Hot Standby Mode
2. Click the radio button to make this link primary or secondary.
Ethernet Ring
To install and use the Ethernet Ring feature, see Chapter 13.
Ethernet QoS
To install and use the Ethernet QoS feature, see Chapter 25.
Setting the TDM Jitter Buffer
To set the TDM Jitter Buffer size:
1. Click the TDM Jitter Buffer tab. The following dialog appears:
To Next Page
Loading...
