RAIDILLON 42-A10 - Butterfly Clasp Operation

11
1.3.2 Buttery deployment clasp
Open your Raidillon
watch’s clasp by pres-
sing simultaneously
on both pushbuttons
located on both sides
of the buckle.
1
Open the buckle to
loosen the strap and
remove the watch
from your wrist.
Release the adjust-
ment mechanism
by removing the pin
from the hole of the
strap’s long end.
Make the mecha-
nism slide along the
long end, and close it
again by introducing
the pin in the chosen
hole.
Fit your watch on
your wrist and in-
sert the long end
throught the xed
loop.
2
3 4
5
Close the deploy-
ment strap until you
hear a soft click and
insert the long end
into the mobile loop.
6