19
Using the double chronograph function :
Start the timing by pressing the (A) pushbutton: the split-second hand
overlaps the second hand and becomes invisible.
Press the (C) pushbutton for the split-second hand to stop.You may
also see the intermediate time as the chronograph still operates.
Press the (C) pushbutton again to make the split-second hand overlap
the second hand again.
To measure a second intermediate time, press the (C) pushbutton a
third time until the split-second hand stops again.
Press the (A) pushbutton to stop timing.
Please note that once the timing stops, you should press the (C) push
button in order for the split-second hand to overlap the second hand
and for both hands to be reset to zero.
Finally, press the (B) pushbutton to reset.
A pushbuttonC pushbutton
B pushbutton
Split-second hand
1
2
3
4
5
6
7
To Next Page
Loading...