Rail King Work Train - Passenger Car Lamp Replacement

13
Diesel “Work Train“ Train Set Operating Manual
RAILKING
To remove the Diesel “Work Train“ cab from its chassis, follow the
body removal instructions on the previous pages. Once the body has
been removed, push the headlight bulb downward and rotate it
counter- clockwise as seen in Figure 15 to remove the burned out bulb.
Caboose Car Lamp Replacement
To remove a passenger car body from its chassis, turn the car over and
locate and remove the two mounting screws (as seen in Figure 16)
attaching the roof to the body and chassis. Once the screws are
removed, gently lift the car roof up and away from the body and chassis
(see Figure 17).
After removing the roof from the body and chassis, locate the car
interior lamp housings mounted on the inside of the car body. Once
Figure 16: Lifting the
Caboose Car roof away
from its body.
Figure 17: Removing The bulb from the
lamp housing.