3
Diesel “Work Train“ Train Set Operating Manual
RAILKING
Compatibility
Our designers have sized the engine to operate on any traditional 0-27
or larger O Gauge track system, including RiteTrax using any standard
AC transformer including the Z-750 transformer packaged in your set.
(See page 19 for a complete list of compatible transformers as well as
wiring instructions.) All RailKing products are compatible with most
other 3-rail locomotives, rolling stock, and accessories.
Equipment Options
Your ready-to-run set features a Diesel “Work Train“ Train locomotive
equipped with an operating headlight, electronic horn, and DCRU®
electronic reverse unit. All are simple and fun to operate. In addition
to the locomotive, your set should also include an oval of RiteTrax®
track (8 curved and 4 straight sections), a RiteTrax® lighted lock-on and
wire harness set (for connecting the track to the transformer) and a 75-
watt Z-750 transformer and controller.
You’ll find complete instructions for choosing and setting up options in
the following pages. If you don’t read through the entire manual before
starting to operate your equipment, be sure to check the Quick Start
Basic Operating Instructions, which will give you the basics of the
operating system.
CAUTION - ELECTRICALLY OPERATED
PRODUCT:
Not recommended for children under ten years of age without adult
supervision. As with all electric products, precautions should be
observed during handling and use to reduce the risk of electric shock.
Transformer Ratings:
Input: 120 VAC
60 HZ Only
Output: 21VAC, 3.75A, 78VA
To Next Page
Loading...
