Rain Bird E-12i - User Manual

1
2: 0
E-CLASS
Installation, Programming & Operation Guide
PREFERRED BY PROFESSIONALS WORLDWIDE
Indoor or Outdoor
E-3
E-6
E-9
E-12
Indoor Only
E-3i
E-6i
E-9i
E-12i
INTRODUCTION
Thank you for purchasing a Rain Bird E-Class irrigation system Controller. This manual describes how
to install and operate your controller. Installation instructions are in the last section. Please read the in-
structions carefully and keep this manual in a handy location for future reference.
PROGRAMMING CONTROLS
The following is a key to the buttons and icons on the E-Class controller faceplate.
OFF
AUTOMATIC MODE
DATE/TIME
DAY CYCLE:
DAY CYCLEDAY CYCLE
WATER DAY:
WATER DAYWATER DAY
START TIME:
START TIMESTART TIME
STATION RUN TIME
WATER BUDGET
SET MONTH
SET DATE
SET TIME
MANUAL STATION(S) START
MANUAL PROGRAM (CYCLE)
START
TEST PROGRAM
TIME/DATE
OPTION
PLUS (add): +
MINUS (subtract): -
SELECT PROGRAM:
ABC
ENTER: ENTERENTER
CONTROLLER KNOB
(PROGRAMMING DIAL)

Summary

SET YEAR, DATE AND TIME

SET REPEATING DAY CYCLE

SET WATERING DAYS

SET WATERING START TIMES

SET STATION RUN TIMES

ADJUST WATER BUDGET PERCENTAGE

TO MANUALLY OPERATE STATION(S)

TO MANUALLY OPERATE PROGRAM(S)

TROUBLESHOOTING

DIAGNOSTIC CIRCUIT BREAKER

Explains the controller's circuit breaker function and error indicators.

INSTALLING THE CONTROLLER

CHOOSE LOCATION

MOUNT CONTROLLER

CONNECT MAIN POWER WIRES

Instructions for connecting the controller to the main electrical power source.

CONNECT FIELD WIRES TO REMOTE CONTROL VALVES

Guides on wiring the controller to the irrigation valves and pump start relay.

CONNECT SENSOR

Rain Bird E-12i Specifications

General

Brand	Rain Bird
Model	E-12i
Category	Network Router
Language	English