Peak power handling 120 W 150 W
Power rating 80 W 100 W
Sensitivity 90 dB 1W/1m 90 dB 1W/1m
Frequency response 60 - 20.000 Hz 50 - 20.000 Hz
Impedance
4 Ω 4 Ω
Crossover 2-Way-Mono 2-Way-Mono
Slope 12 dB/Oct. 12 dB/Oct.
Crossover frequency 5.200 Hz 5.200 Hz
Tweeter attenuation 2 x 2 x
Thermal protection PTC PTC
Mounting depth without / with ring 52 / 50 mm 62 / 60 mm
External diameter without / with ring 130 / 164 mm 166 / 180 mm
External diameter with ears 153 mm -
Installation diameter 111 mm 142 mm
Fastening diameter 138 mm 156 mm
mm
External diameter 35 / 45
mm
Fastening diameter 24 / 39
mm
2
= with flush-mount
Matching Loudspeaker Mounting Rings:
RAC161066 Grille & Ring Set 130mm / 5.25” for EL-C5.2
RAC161067 Grille & Ring Set 165mm / 6.5” for EL-C6.2
Advice:
The high power loudspeaker outputs of popular headunits will be advertised with high wattage. These
power ratings are marketing figures normally. Our loudspeaker products have a high sensitivity and
especially the products of Experience Line can be driven directly from the headunit with at least
2 x 12 Watt RMS. Generally however we recommend using an amplifier to be able to use the full
dynamic range of the loudspeakers.