rainforest EMU - Step 4: Wait for your EMU to join the smart meter

www.rainforestautomation.com
EMU™
User Manual
6
Step 4: Wait for your EMU™ to join the smart meter
Your EMU™ will attempt to connect to the smart meter. You will see these two
screens:
You may see these two screens a few times. This could take 1-2 minutes.
When your EMU™ finds the smart meter and successfully communicates with it,
you will see this screen:
A short time later, the Current Time screen will appear, with dashes instead of
digits:
As soon as the dashes are replaced with the current time and date, it means that
your EMU™ has successfully read the meter, and is ready for use.
Joined Network
Current Time
--- --, ----
--:-- --
Searching for
meters
Connecting to Meter
Please Wait...