4. Installation completed and tested
4.1 Press the button to activate the pump, then the water will pumped
to your plants.
no tightening, please keep tightening until no leakage.
4.3 After testing with no usage problems, go to the next step: WiFi pairing
and programming plans.
- 16 -
2) When you need to connect the hose while splitting
to twoways, you can use the
T
3) When you need to connect a hose while splitting to
other 3 ways
3.7 When water needs to be delivered to the soil, you
need to use the micro drip emitters
Tips:
deep, which will help water enter the plant roots.
3.8 Please install Tubing End Caps after water ows out from the end of
the pipe to avoid air in the pipe so that the water cannot ow
smoothly to the end of the pipe.
To Next Page
Loading...