RainPoint IK10PW - Water Flow and Pipe Issues; Schedule Execution Problems

Uneven water Too far away from pots and
water containers or too long
pipes can reduce the pump's
The fuher away from the pump the potted plant
is, the weaker the water ow will become. Please
use some clamps to hold the rst few branches so
that the mainstream water can be delivered
quickly and for a long time.
Problem Possible Cause Possible Solution
and remove
water pipes
Watering
schedule not
on time
Because of the material, in
order to make the pipe more
durable.
The lack of water at the inlet
resulted in the plan not
being implemented on time.
There is no auto-run schedule
set up on the APP side.
The water pump unexpectedly
lost power and the plan was
emptied.
Put the head of hose into hot water for 10s or Put
a little veggie oil on the end of the hose before
connecting.
Check if there is a lack of water in the container
at the inlet.
(If there is a leakage the schedule will not running)
Once the plan parameters have been set, the plan
will be executed automatically according to the
parameters set by checking "Auto Run".
The watering schedule needs
to be reset.
troubleshooting steps, please
contact us by phone or email : US: 1-833-381-5659 (EN)(MON-FRI󶀅9:30󶀅AM-5:30󶀅PM󶀅PST)
EU: +44 800-808-5337 (EN DE)(MON-FRI󶀅9:00󶀅AM-5:00󶀅PM󶀅CET)
Email:󶀅seice@rainpointus.com
- 27 -