8 • RAINSOFT TC CONDITIONER SERIES OWNER’S MANUAL
Important Note:
elbow on the brine tank.
brine valve fails.
10. Install the Brine Safety Float
•
•
•
Figures 7.2, 7.3, 7.4, and 7.5
Figure 7.2
Figure 7.1
Figure 7.3 Figure 7.4
Figure 7.5
11. Install the Brine Line
• Slide the brass compression nut over the end of the brine line, followed by the ferrule
• Insert a tube support into the other end of the brine line and push the brine line into
BRINE LINE
OVERFLOW LI NE CONNECTI ON
Figure 8
12. Install the Brine Overow Line (indoors)
• brine
13. Attach the Electrical Connection
• Insert the barrel plug from the DC power supply into the mating jack in the back of the
control box .
• Plug the DC power supply into a 110 VAC 60 Hz or 230 VAC 50 Hz outlet.
To Next Page
Loading...
