5|PAGE
RAJANTBREADCRUMB®DX2 QUICKSTARTGUIDE
Utilize pins 4&5 +VDC and 7&8 -VDC
Table 1: BreadCrumb DX2 Power Requirements (Passive PoE)
Input Voltage Avg Idle Usage @ 24 V Max Peak Usage @ 24 V
8 - 60 VDC 2.8 W + USB usage 7.5 W + USB usage
Mounting Instructions
_____________________________________
The BreadCrumb DX2 offers features that support mounting to a surface.
There are two mounting standoffs on the bottom of the BreadCrumb DX2. The standoffs
accept standard thread M3 screws and have 7.6 mm or .3 inch thread depth. Rajant
recommends 4-5 threads minimum to mount. The distance between the mounting holes of
the standoffs is 49 mm center to center.
Figure 3: BreadCrumb DX2 Mounting Standoffs (Bottom)
(1) Standoffs for mounting
To Next Page
Loading...