RAK RAK5010 - Finding the latest RAK5010 firmware; Burning RAK5010 firmware with J-Link

V3.0.0.0.3
3
1. Where is the latest firmware?
If you want to get a pre-compiled firmware instead of compiling the source code by
yourself, and flash it into RAK5010 through J-Link, you can find the latest firmware on
RAK website after it is released.
https://downloads.rakwireless.com/en/Cellular/RAK5010/Firmware/
Note: You should uncompress it to get the .hex file.
If you want to get a DFU package so that you can upgrade the firmware for RAK5010
through DFU over BLE, please download the latest DFU package of RAK5010 here:
https://downloads.rakwireless.com/en/Cellular/RAK5010/Firmware/DFU-Package/
If you want to compile a customized firmware by yourself, you can have a look at this topic
firstly:
https://forum.rakwireless.com/t/rak-online-compiler-for-you-to-compile-your-customized-fi
rmware-based-on-rui/662/38
2. How to burn the firmware for RAK5010
through J-Link?
Firstly, connect RAK5010 with PC through JTAG as follow: