EasyManua.ls Logo

RAM 2011 DAKOTA - Programmable Features

RAM 2011 DAKOTA
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROGRAMMABLE FEATURES
The following features may be programmed using the Key Fob transmitter or
the ignition switch and driver's door lock switch.
NOTE: Pressing the LOCK button while you are inside the vehicle will activate the
Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated
will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle
Security Alarm.
Unlock On First Press
To unlock either the driver's side, or all doors, on the first press of the
UNLOCK button:
Press and hold the LOCK button for at least 4 seconds, but no longer than
10 seconds. Then, press and hold the UNLOCK button while still holding the
LOCK button.
Release both buttons at the same time.
Auto Unlock Doors On Exit
To have all of the vehicle doors unlock when any door is opened:
Enter your vehicle and close all the doors.
Fasten your seatbelt.
Within 15 seconds, cycle the ignition switch between LOCK and ON and
then back to LOCK four times, ending up in the LOCK position (do not start
the engine).
Press the power door UNLOCK switch to unlock the doors. A single chime
will indicate that programming is complete.
Auto Door Lock
To have the doors lock automatically when the vehicle’s speed exceeds
15 mph (24 km/h):
Enter your vehicle and close all the doors.
Fasten your seatbelt.
Within 10 seconds, cycle the ignition switch between LOCK and ON and
then back to LOCK four times, ending up in the LOCK position (do not start
the engine).
Press the power door LOCK switch to lock the doors. A single chime will
indicate that programming is complete.
Sound Horn With Lock
To turn the horn chirp on or off when the doors are locked:
Press the LOCK button for at least 4 seconds, but no longer than 6 seconds.
Then, press the PANIC button while still holding the LOCK button. A single
chime will sound to indicate that this feature has changed.
Release both buttons at the same time.
ELECTRONICS
28

Table of Contents

Related product manuals