RAM 2011 DAKOTA - Fluids and Capacities

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant
3.7L, 4.7L
MOPAR
®
Antifreeze/Coolant Five
Year/100,000 Mile Formula HOAT
(Hybrid Organic Additive
Technology) or equivalent.
13.3 Quarts
(12.5 Liters) Includes
heater and coolant
recovery bottle filled
to MAX level.
Engine Oil with
Filter 3.7L, 4.7L
API certified 5W-20 engine oil,
meeting the requirements of
Chrysler Material Standard
MS-6395. Refer to your oil filler cap
for correct SAE grade.
3.7L 5 Quarts
(4.7 Liters) 4.7L
6 Quarts (5.7 Liters)
Fuel Selection 3.7L,
4.7L
87 Octane 22 Gallons (83 Liters)
Engine Oil Filter
3.7L, 4.7L
MOPAR
®
Engine Oil Filter or
equivalent.
—
Spark Plug 3.7L ZFR6F-11G (Gap 0.043 in [1.09 mm]) —
Spark Plug 4.7L Upper Bank — FR8TE2 (Gap
0.039 in [0.99 mm]) Lower Bank —
FR8T1332 (Gap 0.051 in [1.30 mm]).
—
Automatic
Transmission
MOPAR
®
ATF+4
®
Automatic
Transmission Fluid or equivalent
licensed ATF+4
®
product.
—
Transfer Case MOPAR
®
ATF+4
®
Automatic
Transmission Fluid or equivalent
licensed ATF+4
®
product.
—
Front Axle SAE 75W-90 Multi-Purpose Type,
GL-5 Gear Lubricant MS-9763 or
equivalent.
—
Rear Axle SAE 75W-140 Synthetic Gear
Lubricant MS-8985. Limited-slip
rear axles require MOPAR
®
Limited-Slip Additive MS-10111 or
equivalent. Whenever a fluid change
is made, 4 oz (118 ml) should be
added to the gear lubricant.
—
Brake Master
Cylinder
MOPAR
®
DOT 3 and SAE J1703
should be used or equivalent. If
DOT 3 is not available, then DOT 4
is acceptable. Use only
recommended Brake Fluids.
—
Power Steering
Reservoir
MOPAR
®
Power Steering Fluid +4 or
MOPAR
®
ATF+4
®
Automatic
Transmission Fluid or equivalent
licensed ATF+4
®
product.
—
MAINTAINING YOUR VEHICLE
57