WARNING!
Drivers must be careful when backing up even when
using the ParkView Rear Back Up Camera. Always
check carefully behind your vehicle, and be sure to
check for pedestrians, animals, other vehicles, obstruc-
tions, or blind spots before backing up. You are re-
sponsible for the safety of your surroundings and must
continue to pay attention while backing up. Failure to
do so can result in serious injury or death.
CAUTION!
• To avoid vehicle damage, ParkView should only be
used as a parking aid. The ParkView camera is
unable to view every obstacle or object in your drive
path.
• To avoid vehicle damage, the vehicle must be driven
slowly when using ParkView to be able to stop in
time when an obstacle is seen. It is recommended
(Continued)
CAUTION! (Continued)
that the driver look frequently over his/her shoulder
when using ParkView.
NOTE: If snow, ice, mud, or any foreign substance builds
up on the camera lens, clean the lens, rinse with water, and
dry with a soft cloth. Do not cover the lens.
Turning Rear View Camera Image On:
1. Press the ⬙Controls⬙ button located on the bottom of the
Uconnect display.
2. Press the ⬙Backup Camera⬙ button
to turn the Rear
View Camera system on.
NOTE: Once initiated by the ⬙Backup Camera⬙ button, the
Rear View Camera image may be deactivated by pressing
the ⬙X⬙ button on the touchscreen. On deactivation, the
previous selected screen will appear.
412 STARTING AND OPERATING
To Next Page
Loading...
