GETTING TO KNOW YOUR VEHICLE 103
10. Push clamp handles upward to the clamped
position to properly engage the clamps.
Clamped Position
Improper Clamp Position
NOTE:
Once clamped, be sure the clamps are not
partially clamped to the truck bed flange.
The Tonneau Cover clamps can be locked when
in the clamped position by placing a lock
through the locking hole.
Locking Hole
Tri-Fold Tonneau Cover Cleaning
For proper cleaning of the Tonneau Cover, use
Mopar Whitewall & Vinyl Top Cleaner and Mopar
Leather & Vinyl Conditioner/Protectant.
CAUTION!
It is the driver’s responsibility to ensure the
Tonneau Cover is properly installed on the
vehicle. Failure to follow this procedure can
result in detachment of the Tonneau Cover
from the vehicle and/or damage to the
vehicle/Tonneau Cover.
2
19_DJD2_OM_EN_USC_t.book Page 103
To Next Page
Loading...
