318 IN CASE OF EMERGENCY
Remove the jack and tools from the bracket
assembly. Turn the jack-turn-screw
counterclockwise to release jack from bracket
assembly.
Jack And Tools Bracket Assembly
There are two ways to assemble the tools:
Assembled For Spare Tire Lowering/Raising
Assembled For Spare Tire Lowering/Raising
1 — Lug Wrench
2 — Extension 2
3 — Extension 3
4 — Extension 4
CAUTION!
The lug wrench can only be attached to
extension 2.
When attaching the tool to the winch mech-
anism be sure the large flared end opening
on extension 4 is positioned correctly over
the winch mechanism adjusting nut.
Damage to the lug wrench, extensions and
winch mechanism may occur from
improper tool assembly.
19_DJD2_OM_EN_USC_t.book Page 318
To Next Page
