GETTING TO KNOW YOUR INSTRUMENT PANEL 17
When “Standard” mode is selected, the
HUD image is split into thirds with the speed
limit indicator shown to the left, vehicle
speed in the center, and turn-by-turn navi-
gation to the right.
Advanced: Speed, Speed Limit, Navigation,
Driver Assist (ACC/Cruise, LaneSense,
Highway Assist/Highway Assist+), Gear
Advanced Mode
When “Advanced” mode is selected, the HUD
displays the vehicle speed, turn-by-turn naviga-
tion, speed limit, driver assist function(s), and
current gear.
Custom 1: Speed, Speed Limit
Custom 2: Speed, Speed Limit, Navigation
Custom 3: Speed, Speed Limit, Navigation,
Driver Assist (ACC/Cruise, LaneSense,
Highway Assist/Highway Assist+)
Custom 4: Speed, Speed Limit, Navigation,
Driver Assist (ACC/Cruise, LaneSense,
Highway Assist/Highway Assist+), Gear
Sport View
Baja View
Display Height
Brightness
Expanded Example of HUD Display
NOTE:
The HUD basic settings (Brightness, Display Height
and Non Custom layouts), are controlled through
the Settings Screen in the Instrument Cluster
Ú page 10.
TRX DRIVE MODE
Drive Mode Buttons
Push and release the left or right drive mode
arrow button to change between the different Drive
Modes. A pop-up will appear in the instrument
cluster display to assist with choosing the desired
drive mode. A drive mode status indicator will
appear in the instrument cluster display
Ú page 18. You can also double push on the TRX
button to go directly to Custom Mode Ú page 55.
NOTE:
The selected drive mode will be applied once the
instrument cluster pop-up times out due to lack of
additional presses of the left or right arrow
button Ú page 47.
1 – Left Drive Mode Arrow
2 – Right Drive Mode Arrow
3
23_DT_TRX_SU_EN_USC_t.book Page 17
To Next Page
Loading...
