RAM TRX 2023 - Engine Fluids and Lubricants

To Next Page

To Previous Page

96 TECHNICAL SPECIFICATIONS

ENGINE FLUIDS AND LUBRICANTS

Component Fluid, Lubricant, or Genuine Part

Engine/Intercooler Coolant

We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile

(240,000 km) Formula OAT (Organic Additive Technology) that meets the

requirements of the manufacturer Material Standard MS.90032.

Engine Oil – 6.2L Engine

We recommend using Mopar® API Certified SAE 0W-40 Full Synthetic Engine

Oil which meets the requirements of the manufacturer Material Standard

MS-A0921. Equivalent full synthetic SAE 0W-40 engine oil can be used but

must have the API Donut trademark.

Fuel Selection – 6.2L Engine

Premium Unleaded 91 Octane Only or Higher (R+M)/2 Method,

0-15% Ethanol (Do Not Use E-85).

CAUTION!

 Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and

may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Tech-

nology (HOAT) engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze). If a non-OAT engine coolant (antifreeze) is introduced into the

cooling system in an emergency, the cooling system will need to be drained, flushed, and refilled with fresh OAT coolant (conforming to MS.90032), by an

authorized dealer as soon as possible.

 Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be

compatible with the radiator engine coolant and may plug the radiator.

 This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant

(antifreeze) is not recommended.