EasyManua.ls Logo

RAM TRX 2023 - TRX Modes

RAM TRX 2023
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STARTING AND OPERATING 29
The cluster icon and switch lamp will flash for
several seconds then extinguish when SSC
disables due to excess speed.
The cluster icon and switch lamp will flash then
extinguish when SSC deactivates due to over-
heated brakes.
TRX M ODES
Description
TRX modes combine the capabilities of the vehicle
control systems, along with driver input, to provide
the best performance for all terrains.
Use the TRX button and selection arrows to select
the desired mode.
TRX Button
TRX modes consist of the following positions:
AUTO – This mode is intended for typical
on-road driving with default settings.
SNOW – This mode maximizes traction and
stability with equal torque split between the
front and rear wheels. The transmission
defaults to early shifting and engine throttle
response is softened to reduce wheel slip.
SNOW mode is only meant to assist and is not a
replacement for safe driving practices during
inclement weather. This feature will reset to
AUTO upon an ignition cycle if not in 4WD LOW.
TOW – This mode minimizes transmission gear
changes and adapts the suspension for towing
or hauling heavy loads. Drive torque is more
evenly split between the front and rear wheels
for improved traction. This feature will reset to
AUTO upon an ignition cycle if not in 4WD LOW.
SPORT – This mode improves handling capa-
bility through front and rear torque split and
increased suspension control. The transmission
delivers quicker, firmer shifts. Steering force is
increased for improved feedback and control.
This feature will reset to AUTO on an ignition
cycle. SPORT mode is not available while in 4WD
LOW.
CUSTOM This mode allows the driver to create
a custom vehicle configuration that is saved for
quick selection of favorite settings. The system
will return to AUTO mode when the ignition
switch is cycled from RUN to OFF to RUN, if this
mode is selected. While in CUSTOM mode the
Stability, Transmission, Steering, Suspension,
and paddle shifter settings may be configured
through the custom mode set-up. This feature
will reset to AUTO on an ignition cycle if not in
4WD LOW.
WARNING!
SSC is only intended to assist the driver in
controlling vehicle speed when driving in
off-road conditions. The driver must remain
attentive to the driving conditions and is
responsible for maintaining a safe vehicle
speed.
1 — TRX Button
2 — Right Arrow
3 — Left Arrow
4
23_DT_TRX_SU_EN_USC_t.book Page 29

Table of Contents

Related product manuals