IN CASE OF EMERGENCY 75
Front Jacking Location
Front Lifting Point
Front Jacking Location
Rear Jacking Location
Operate the jack using the extension with jack
hook and the lug wrench. The extension tubes
may be used but is not required.
When changing a rear wheel, assemble the ex-
tension with jack hook to the jack and connect
the extension tubes. Access the rear jacking lo-
cation from behind the rear tire. Place the jack
under the Jack Lifting Point located on the rear
axle lower control arm bracket. Then locate the
slot in the jack lift plate onto the rear axle Jack
Lifting Point. Attach the extension with jack
hook extending to the rear of the vehicle.
Rear Lifting Point
Rear Jacking Location
Connect the long extensions to the lug wrench.
CAUTION!
Before raising the wheel off the ground, make
sure that the jack will not damage surrounding
truck parts and adjust the jack position as
required.
7
23_DT_TRX_SU_EN_USC_t.book Page 75
To Next Page
Loading...
