RAMROD PRO 1330 - Fuels, Lubricants and Capacities

15
IV. MAINTENANCE
FUELS, LUBRICANTS AND CAPACITIES
The service obtained from your Mini-Skid is greatly affected by the quality of the
petroleum products used in it. It requires only common products, which are commercially
available through the outlets of major refineries. The following chart shows which
lubricant to use in the various components of the Mini-Skid.
COMPONENT
TEMPERATURES
TYPE OF
LUBRICANT/FLUID
CAPACITY
Liter (US. Gals.)
Engine Oil
See engine owner’s
manual
See engine owners
Manual
See engine owner’s
manual
Fuel Tank
All Temperatures
Gas – Regular
Diesel – Regular
30 Liter (8 US gal.)
Hydraulic Oil
Reservoir
All Temperatures
ISO 46 Anti-Wear
Hydraulic Oil
37 Liters
10 US Gal.
WARNING
Never Add Fuel To A Mini-Skid When
The Engine Is Running Or Is Hot.
Fuel filler location: To the left of the
operator controls, Figure 20.
Hydraulic oil filler location: To the right
of the operator controls, Figure 21.
WARNING
Do Not Service Mini-Skid While Engine
Is Running.
Figure 21
Figure 20