RAMSET MD380 User Manual

THIS TOOL FOR USE BY LICENSED OPERATORS ONLY.
READ AND OBEY ALL SAFETY AND OPERATING
INSTRUCTIONS BEFORE OPERATING TOOL.
MD380 TOOL
OPERATOR’S
SAFETY &
OPERATING
INSTRUCTION
MANUAL
SINGLE SHOT, LOW VELOCITY
PISTON TYPE FASTENING TOOL
DANGER

RAMSET MD380 Specifications

General

Brand	RAMSET
Model	MD380
Category	Power Tool
Language	English

Summary

Safety Introduction

Safety Instructions

Center Punch Test

Procedure to test material suitability for fastening.

Loads & Load Selection Safety

Guidelines for selecting correct power loads and color-blind operator considerations.

Workplace Safety

Requirements for eye/hearing protection, clear work area, and flammable materials.

Tool Handling Safety

Safe practices for loading, carrying, and storing the tool.

Fastener Driving Safety

Proper technique for driving fasteners, edge distance, and misfire procedures.

Fasteners and Loads

Loads and Power Levels

Details on Ramset .27cal. RL loads, power levels, and selection.

Fastening Applications

Fastening to Concrete

Guidelines for spacing and edge distance when fastening into concrete.

Fastening to Masonry

Recommendations for fastening into masonry, including edge distance.

Fastening to Steel

Guidelines for spacing and edge distance when fastening into steel.

Tool Operation

Daily Function Test

Procedure to check tool functionality before loading and use.

Troubleshooting

Parts Schematic

Parts Listing and Maintenance

Normal Cleaning

Daily cleaning procedures for front-end parts and general inspection.

General Maintenance

Extensive cleaning recommended every six months or with heavy use.

Disassembly

Tool Disassembly

Step-by-step instructions for taking the tool apart.

Warranty