Rancilio STILE - Grinding Degree Adjustment; Doser Grinder Maintenance; Routine Maintenance Schedule

STILE_05.2022
STILE_05.2022
17
/
2
8
1
6
/
2
8
STILE
STILE
EN
EN
STILE
STILE
EN
EN
4.6 Adjustment of degree of grinding
The doser grinder is tested with an intermediate grinding setting. You can adjust the
degree of grinding of the coff ee to your taste which can, however, also be infl uenced by
the type of coff ee and the freshness of the beans.
To grind the beans more fi nely or
coarsely, turn the adjustment ring (detail
1) located under the hopper (detail 2).
• Turn the ring clockwise to grind more
coarsely;
• Turn the ring anti-clockwise to grind
more fi nely;
The ring must be adjusted with the
motor running. It is advisable to grind
small quantities of coff ee for a visual
assessment of the degree of grinding.
Prepare a coff ee to check that the brewing
time, appearance and fl avour meet with
your satisfaction.
For an espresso, take into consideration
that too coarse a grind results in a light
coff ee without cream, while too fi ne a
grind results in a dark coff ee without
cream.
1
0
2
1
-
-
+
+
5 MAINTENANCE OF THE DOSER GRINDER
5.1 Routine maintenance
WARNING! All routine maintenance of your appliance is summarised in the
following table and must be carried out following the procedures described in the
relevant sections.
ROUTINE MAINTENANCE
Frequency Type of intervention To be done by Section
At end of daily
use
Thorough cleaning of the
appliance
User 5.1.1
With each new
use
Check of condition of the power
cable
User
5.1.2
When necessary Replacement of the power cord
Specialised
technician
When necessary
Thorough cleaning of the
grinders
User 5.1.3
When necessary
Setting aside of the doser
grinder
User 5.1.4
When necessary Replacement of the grinders
Specialised
technician
5.1.5