Need help?Do you have a question about the Randall SATAN and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Power | 120 Watts |
| Preamp Tubes | 4 x 12AX7 |
| EQ Controls | Bass, Mid, Treble |
| Footswitchable Channels | Yes |
| Speaker Outputs | 2 x 1/4" |
| EQ | 3-band EQ |
| Inputs | 1 x 1/4" |
| Outputs | 2 x Speaker Out |
| Effects Loop | Yes |
| Type | Tube Amplifier Head |
Details the input jacks for active/passive pickups and the channel selector switch.
Explains the gain, tone, and volume controls specific to Channel 1.
Details the gain, tone, and volume controls for the clean channel.
Describes the Depth, Presence, Master, Standby, and Power controls.
Covers mains voltage selection, AC power input, and fuse types.
Explains the jacks for footswitch and external effect loop.
Guides on measuring and setting the amplifier's bias.
Details how to connect external speaker cabinets.
Describes the SERIES and PARALLEL modes for the effects loop.
Explains the RAW and EMULATED line outputs.
Details the warranty period, coverage, and exclusions for the amplifier.
Lists critical safety instructions for operating the amplifier.
To Next Page
