EasyManua.ls Logo

Randell RCS-24-WS User Manual

Randell RCS-24-WS
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
2016 Gees Mill Road, Suite 200, Conyers, GA 30013
888-994-7636, fax 888-864-7636
unifiedbrands.net
PART NUMBER PP MNL2103, REV. A (06/21)
This manual provides information for:
RCS-24-WS 24” CHEESER STATION™
WITH INTEGRAL SCALE (SHOWN)
RCS-24 24” CHEESER STATION™
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ,
UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS
CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
WARNING R290 flammable refrigerant in use. Improper installation,
adjustment, alteration, service or maintenance can cause property
damage, injury or death. Read the installation, operating and maintenance
instructions thoroughly before installing or servicing this equipment.
NOTIFY CARRIER OF DAMAGE AT ONCE It is the responsibility of the
consignee to inspect the container upon receipt of same and to determine
the possibility of any damage, including concealed damage. Unified
Brands suggests that if you are suspicious of damage to make a notation
on the delivery receipt. It will be the responsibility of the consignee to file
a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 888-994-7636.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE: Due to a continuous program of product improvement, Unified Brands
reserves the right to make changes in design and specifications without prior notice.
NOTICE: Please read the entire manual carefully before installation. If certain
recommended procedures are not followed, warranty claims will be denied.
MODEL NUMBER _________________________
SERIAL NUMBER _________________________
INSTALLATION DATE ______________________
The serial number is located on the right side inside
the base cabinet behind the grilled hinged door. An
example is shown here.
EQUIPMENT DESCRIPTION
Information contained in this document is known to be current and accurate at the time of printing/creation. Unified Brands
recommends referencing our product line websites, unifiedbrands.net, for the most updated product information and
specifications. The company reserves the right of final interpretation of the user manual. Information subject to change without
notice. © 2021 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
MODEL LENGTH DEPTH*
HEIGHT
INTEGRATED
SCALE
CHEESE BIN
STORAGE CU. FT.
HP
VOLT/CYCLE/
PHASE
AMPS
NEMA
PLUG
SHIP WT.
WORK SURFACE REAR OF UNIT
RCS-24-WS
24” 33” 36” 41” YES 1.25 1/4 115/60/1 1.8 5-15P 180
RCS-24
24” 33” 36” 41” NO 1.25 1/4 115/60/1 1.8 5-15P 180
*Depth = 34” with 1” standoff bumpers
RCS-24-WS
RCS-24
Question and Answer IconNeed help?

Do you have a question about the Randell RCS-24-WS and is the answer not in the manual?

Randell RCS-24-WS Specifications

General IconGeneral
BrandRandell
ModelRCS-24-WS
CategoryCommercial Food Equipment
LanguageEnglish

Summary

Important Information and Safety

Exterior Unit Safety Warnings

Warnings regarding fire and explosion risks related to the unit's exterior.

Refrigerant Handling Precautions

Safety guidelines for handling R290 flammable refrigerant to prevent leaks and risks.

Installation Guidelines and Warnings

Critical instructions and warnings for proper installation to avoid damage or warranty voidance.

Installation Procedures

Daily Operation and Controls

Refrigeration Control Panel

Overview and operation of the refrigeration control panel and its various functions.

Controller Operation and Maintenance

Danfoss Controller Functions

Explanation of LED indicators, power controls, and setting temperature points.

Preventative Maintenance Procedures

Troubleshooting and Support

General Unit Troubleshooting

Common symptoms and their possible causes and solutions for the unit's operation.

Weigh Scale Platform Troubleshooting

Specific troubleshooting for the weigh scale platform, including display and accuracy issues.

Controller Codes and Error Messages

Danfoss Controller Alarm Codes

List of alarm codes displayed by the Danfoss controller and their corresponding actions.

Weigh Scale Error Messages

Common error codes for the weigh scale, their descriptions, and recommended actions.

Service and Warranty

Service Safety Precautions

Essential safety measures to follow when servicing the equipment, especially R290 systems.

Refrigerant System Servicing

Procedures for refrigerant recovery, leak checking, repair, and charging.

Parts List - Refrigeration System

Wiring Diagram

Related product manuals