To Next Page

To Previous Page

Preparing for Use

R&S

RTC1000

13Getting Started 1335.7346.02 ─ 02

3.3.3 Powering Off

Powering off is required only if the instrument must be disconnected from all

power supplies.

1. If the instrument is running, press the ON/OFF key on the front panel to shut

down the instrument.

2. Switch the main power switch at the rear of the instrument to position 0.

3. Disconnect the AC power cable from the AC power supply.

Risk of losing data

If you switch off the running instrument using the rear panel switch or by

disconnecting the power cord, the instrument loses its current settings. Fur-

thermore, program data can be lost.

Press the ON/OFF key first to shut down the application properly.

Starting the Instrument

Other manuals for R&S RTC1000

Questions and Answers:

Need help?

Do you have a question about the R&S RTC1000 and is the answer not in the manual?

General