Rane TTM 56S User Manual

Manual-1
TTM 56S
PERFORMANCE MIXER
OPERATORS MANUAL
Quick Start
Congratulations! You are the proud owner of an exceptional per-
formance instrument. Experienced turntablists will find the TTM
56S comfortable and familiar. e TTM 56S has many unique
features which are mastered quicker if you read the manual. Right!
We know you can’t resist jumping right in, but please read at least
this portion of the manual. It will help you get a good start.
About the faders: e program faders and crossfader are magnetic,
non-contact faders. is means No travel noise – No bleed – Ever!
e electrical performance of the faders is unaffected by use. Old
habits are hard to break, but you really don’t have to mess with
these faders. e magnetic faders in this mixer are very different
from what you are used to. Be sure and read the Q and A section
on page Manual-6.
Special Features:
• KILL switches behave like transform controls, to quickly cut a
signal in or out. Be sure these switches are up to get sound!
• Separate CONTOUR controls for each fader and the crossfader
allow continuous adjustment from smooth blend to fast cut.
• e CHANNEL SWAP switch allows the left-hand or right-
hand fader to control PGM 1 or PGM 2.
• Auxiliary Inputs and Outputs, with independent level controls,
give session mixing ability.
WEAR PARTS: is product contains no wear parts.
AUX Inputs may be used for a drum machine, keyboard, etc.
AUX Input comes in after the Crossfader and after the FlexFX loop.
AUX Outputs may be used for recording, booth monitoring, or a second zone.
AUX Output is the same mix as the Master.
• FlexFX™ allow individual assignment of PGM 1, PGM 2 or both to the effects loop. e effects loop is post-fader. You get great results
when using the program faders or crossfader with reverb or other delay effects. For instance, reverb and echo tails are still heard after
the fader is off. e WET/DRY pan lets you control how much of the effect is in the mix.
• ree-band Accelerated-Slope™ EQ allows full cut of each band. e EQ engage switches lets you A/B compare or quickly transform
the EQ effect.
• Two 10-segment meters provide Dual-Mono-Cue or Stereo-Master operation.
• Yes, we included a power switch on the rear.
e flexibility of the TTM 56S can result in some initial confusion. e CHANNEL SWAP switch, KILL switches, REVERSE switches,
Faders and Crossfader are all different ways to cut the signal. We recommend trying one thing at a time. Check that the KILL switches
are ON (up position). Make sure the CHANNEL SWAP switch (and its yellow LED) is off . Start by changing the Contour of each fader,
one at a time. See the diagrams on page Manual-5 to understand the fader responses under different settings, with REVERSE on and off.
Once you understand the controls, start creating!

Rane TTM 56S Specifications

General

Channels quantity	2 channels
Digital sound processing	- bit
Number of EQ bands per channel	3
Line inputs (RCA)	2

Summary

Quick Start Guide

Understanding the Magnetic Faders

Explains the magnetic, non-contact nature of the TTM 56S faders and their benefits.

Key Special Features

Highlights unique features like KILL switches, CONTOUR, CHANNEL SWAP, and Auxiliary I/O.

Effects and EQ Processing

Details the FlexFX loop and EQ for applying external effects to program signals.

Initial Setup Recommendations

Advises starting with specific switches off and then adjusting Contour controls.

Rear Panel Connectivity

Power Supply Details

Details the internal universal switching power supply and power switch location.

Input Signal Connections

Covers PGM 1/2, PHONO GROUNDS, AUX IN, and MIC INPUT specifications.

External Effects Loop Interfaces

Describes the MIC EFFECTS insert jack and the FlexFX stereo loop.

Output Signal Ports

Details MASTER OUT (balanced/unbalanced) and AUX OUT for monitoring.

Detailed Control Functions

Microphone Input Section

Describes MIC LEVEL, OL indicator, and tone controls for the microphone.

Program Channel Operations

Details PGM 1/2 assignment, SOURCE, GAIN, EQ, and PAN controls.

Effect Switches and Aux Input

Explains KILL switches, Aux Input behavior, and FlexFX loop.

Master and Auxiliary Output Levels

Covers the MASTER and AUX OUTPUT level controls for volume adjustment.

Fader and Monitoring Controls

Fader Operation Modes

Discusses magnetic faders, CHANNEL SWAP, CONTOUR, and REVERSE switches.

Input Level Metering Explained

Explains using meters to set GAIN controls for optimal signal levels.

Headphone Monitoring System

Covers PHONES Level, MASTER/CUE switch, and CUE slider for monitoring.

Headphone Output Safety

Warns about high power output and safe usage practices for headphones.

Visualizing Fader Response

Contour and Reverse Effects on Faders

Illustrates the effects of REVERSE and CONTOUR controls on channel and crossfaders.

Fader Maintenance and Support

Fader Durability and Q&A

Addresses fader resistance to chemicals, compatibility, and calibration queries.

Caring for Magnetic Faders

Provides instructions for cleaning and lightly lubricating magnetic faders.

Recommended Lubrication Products

Recommends specific silicone lubricants like Caig DeoxIT FaderLube F100.

Fader Removal and Servicing

Fader Removal Procedure

Outlines the step-by-step procedure for removing faders for maintenance.

Critical Notes for Removal

Provides notes on sensors, ribbon cables, and marking fader positions.

Cleaning Spills and Debris

Offers methods for removing liquids and stubborn debris from faders.

Reassembly and Customer Service

Details reassembly and provides contact information for Rane customer service.

TTM 56S Block Diagram Overview

Internal Signal Path and Connections

Illustrates the internal signal flow, connections, and component interactions.