RR5029 - 2240mm (88 1/8”)
RR5032 - 2286mm (89 7/8”)
8) When the rails are square, tighten all 8 bolts in the log support cross tubes and recheck levelness and
squareness, adjust as needed.
9) Mount and tighten centre log support cross tube.
10) Put the levelling feet on next 2 rails and put them in position at the centre log support cross tube.
11) When you have the rails level with the log support cross tube use clamps to hold the outer rails together.
12) Level one rail, then level the 2
nd
rail from it
To Next Page
Loading...
