9
4 – 5 bars of the output signal strength indicator, which shows
you the maximum output power of the repeater. Each signal bar
represents 5dB.
8 – Antenna Isolation detection. When you turn on the repeater
for the first time, the repeater automatically detects the
oscillation between the outdoor antenna and the indoor
antenna.
7 – Displays the maximum Upload and Download gain.
6 – Uplink Sleep Mode. The uplink of the repeater is in standby
mode when there is no call or data transmission. It will be
activated immediately when a call or data session is initiated.
5 – The specific value of input signal strength measured in dBm,
which shows us the exact input signal level.
13 – Smart function. The repeater can automatically adjust the
gain to prevent Alarm.
9 – Enter to select or confirm the settings.
10 – Return to the previous page or cancel the settings.
11 – Increase the gain.
12 – Decrease the gain.
To Next Page
Loading...