10
3.2.3. 2-band amplification system
1
2
7
9 10 11 12 13
8
3 4 5 6
Applies to models Spear 300 V4G-L, Spear 1000 V4G-L, Spear
2000 V4G-L, Spear 300 V4G-H, Spear 1000 V4G-H, Spear 2000
V4G-H, Spear 300 V3G-L, Spear 1000 V3G-L, Spear 2000 V3G-L.
1 – The line shows the working status of amplification system 1.
5 – Show the maximum Upload gain.
7 – Show the status of Uplink Sleep mode and ISO for system1.
11 – Increase the gain.
9 – Enter or confirm the settings for selection.
13 – Smart function. The repeater can automatically adjust the
gain to prevent Alarm.
2 – The line shows the working status of amplification system 2.
6 – Display the Download maximum gain.
8 – Show the status of Uplink Sleep mode and ISO for system2.
12 – Decrease the gain.
10 – Return to the previous page or cancel the settings.
3 – 5 bars of the output signal strength indicator, which shows
you the maximum output power of the repeater. Each signal ba
represents 5dB.
4 – The specific value of input signal strength measured in dBm,
which shows us the exact input signal level.
To Next Page
Loading...