11
Operating Your Fridge Freezer
q drink mode Beverage cooling
The q drink mode is used to cool drinks within an adjustable
time frame (05, 10, 15, 20, 25 or 30 minutes). While using the
q drink mode the beverages can be stored in the freezer.
Important: “q drink” mode should not be confused
with cooling.
Adjust the time according to the temperature of the
bottles before you put them in the zone 1 and/or zone 2
compartments. For example, the time may initially be set for
5 minutes. If your drinks have not cooled suciently after this
time, you may set a further 5 or 10 minutes cooling time.
While this mode is active, you MUST check the
temperature of the bottles regularly.
NOTE: This will not adjust the freezer temperature
02
mode q drink s.saver
°c
-22
°c
sensor freezer
05
min
cooler
Flashes 4x
02
mode q drink s.saver
°c
-22
°c
sensor freezer
05
min
cooler
02
mode q drink s.saver
°c
-22
°c
sensor freezer
05
min
cooler
02
mode q drink s.saver
°c
-22
°c
sensor freezer
25
min
cooler
02
mode q drink s.saver
°c
-22
°c
sensor freezer
05
min
cooler
02
mode q drink s.saver
°c
-22
°c
sensor freezer
23
min
cooler
Step 1. Press the q drink to activate the mode.
Step 2. After the symbol ashes 4x, 2 beeps will be emitted
and the timer digits will ash.
Step 1. If you accidently pressed the q drink wait for the
wine glass symbol to ash 4x. Press the q drink whilst the
timer digits ashes.
Step 3. Continue to press q drink to select a time frame.
Step 2. The timer digits and symbol will ash and then
disappear.
Step 3. The timer digits will continue to ash. Once the
time has elapsed, q drink mode will emit an audible alert.
NOTE: When the bottles are cool enough, they MUST be removed
from the freezer otherwise they may burst.
Set the q drink mode Beverage cooling
Cancel q drink mode
NOTE: At times the q drink button will emit two beeps, if the
controls has not been previously activated.
NOTE:
At times the q drink button will emit two beeps, if the controls has
not been previously activated.
Flashes 4x