Do you have a question about the Ranger Communications RCI-5054DX and is the answer not in the manual?
Brand | Ranger Communications |
---|---|
Model | RCI-5054DX |
Category | Transceiver |
Language | English |
Details the items included with the RCI-5054DX transceiver and recommends saving packing materials.
Provides guidance on selecting a location for the transceiver for easy access and proper air circulation.
Explains how to connect the transceiver to a 12-13.8 VDC source and cautions about voltage drops.
Details the functions of the numbered controls and buttons on the front panel of the transceiver.
Describes the connectors and ports located on the rear of the transceiver.
Explains the microphone functions, including PTT, UP/DOWN switches, and cable wiring.
Details three methods for setting the transmit and receive frequencies using front panel controls or microphone.
Explains how to select the operating mode (FM, AM, USB, LSB, CW, PA) using the mode selector.
Describes the function for adjusting the RF output power continuously from 1W through 25W.
Explains how to use the scanning feature to locate active frequencies within a preprogrammed band segment.
Enables offsetting transmit frequency from receive frequency for FM repeater operation.
Details how to program and store up to 10 frequencies in memory locations.
Describes how to scan the 10 pre-programmed memory locations.
Explains the S/RF meter and SWR meter functions displayed on the LCD.
Explains how to program upper and lower scan limit frequencies for full band scanning.
Details how to program frequencies into memory and initiate scanning of these locations.
Step-by-step guide to program a transmit frequency offset for FM repeater operation.