To Next PageTo Next Page
Need help?Do you have a question about the Rapid PB131 and is the answer not in the manual?
Read manual for personal safety, proper operation, and maintenance before using the tool.
Tool is for professional application only; do not use for other purposes.
Keep fingers away from trigger when not operating or moving the tool.
Keep body parts away from firing direction to prevent injury from fasteners.
Hold the tool firmly and be prepared to manage recoil during operation.
Handle fasteners carefully, especially during loading/unloading, due to sharp points.
Disconnect tool before unloading fasteners, making adjustments, clearing jams, or changing accessories.
Always wear protective goggles to protect eyes from injury when using power tools.
Hold the tool correctly to counteract normal or sudden movements like recoil.
Use appropriate safety glasses, gloves, and protective clothing during operation.
Maintain balance, watch footing, secure air hose, and ensure no one is below when working at height.
Prolonged tool use can cause discomfort in hands, arms, shoulders, neck, or other body parts.
Avoid overreaching, excessive force, and take rests to prevent repetitive strain injury.
Compressed air can cause severe injury; handle with care.
Always shut off and disconnect the tool from air supply when not in use.
Never direct compressed air at yourself or others.
Check hoses and fittings for damage or looseness, as whipping hoses can cause severe injury.
Disconnect the tool from air supply before performing loading operations.
Load nails into the cartridge downwards until the rail clicks into place.
Connect tool to air supply, pointing it away from yourself and others.
Press tool nose onto workpiece and press trigger to fire fasteners.
Adjust air pressure incrementally to ensure fasteners are driven correctly.
Disconnect tool from air supply to clear staple jams safely.
Release magazine, slide rail back, and remove jammed fasteners.
Perform daily inspections of safety yoke and trigger movement when disconnected from air.
Keep tool clean, use recommended oil, and lubricate magazine parts for optimal performance.
General
