Rapid7 Nexpose - Navigating the LCD Menu

Security Console & Scan Engine Appliance Guide: Navigating the LCD Menu
© 2009 Rapid7 LLC, Boston, MA | Rapid7 LLC Sales: +1 617-247-1717, Technical Support: +1 857-288-7400, Toll Free (USA): 1-866-390-8113
Menu or Submenu Description
Congure Congure the appliance.
NIC 1: link (or no link) Congure NIC 1 (ETH0).
Enabled NIC [checkbox] Enable NIC 1 (ETH0) by pressing the Select button.
Auto (DHCP) [checkbox] Enable autoconguration with DHCP by pressing the Select button.
Manual Congure NIC 1 (ETH0) manually.
IP address Set the IP address of NIC 1 (ETH0).
Netmask Set the subnet mask of NIC 1 (ETH0).
Gateway Set the default gateway for NIC 1 (ETH0).
Date (YYYYMMDD) Set the date using YYYYMMDD format (example: 20090101).
NIC 2: link (or no link) Congure NIC 2 (ETH1).
Enabled NIC [checkbox] Enable NIC 2 (ETH1) by pressing the Select button.
Auto (DHCP) [checkbox] Enable autoconguration with DHCP by pressing the Select button.
Manual Congure NIC 2 (ETH1) manually.
IP address Set the IP address of NIC 2 (ETH1).
Subnet mask Set the subnet mask of NIC 2 (ETH1).
Network Congure network settings.
NICs Congure one of the NICs.
Gateway Set the default gateway for NIC 2 (ETH1).
Other settings Congure other network settings for the Appliance.
Nameserver Set the DNS server for the Appliance.
Domain Set the domain of the Appliance.
Date/Time Congure date and time settings.
Time (HHMM) Set the time using 24-hour HHMM format (example: 2359).
Timezone Select the time zone.
page 7 of 8