Overview
The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated, permanent clip-on
cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-
controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature
even under heavy loads.
• Single-piece anodised aluminium heatsink
• Heatsink-mounted, temperature-controlled blower fan attached by three screws
• Spring-loaded push pins for mounting onto Raspberry Pi 5
• Pre-applied thermal pads for heat transfer
Raspberry Pi Active Cooler for Raspberry Pi 5 – Raspberry Pi Ltd 2
To Next Page
Loading...
