Raspberry Pi 3 B+ User Manual

RDK-B (Raspberry Pi 3 B+) Build and Setup Manual -
Router Profile
Introduction
Build Instructions and Flashing Procedure
Hardware and Setup Information
RDK-B Bootup Sequence
Router Profile Test Bed using RPI
Router Functionality Use Case - Internet connectivity for Wired and Wireless Client(s)
Lists of Supported Features
Supported Features User manual
Additional Links
Yocto Modification for RDK B+ Support
Introduction
The Raspberry Pi 3 Model B+ featuring a 64-bit quad core running at 1.4 Ghz. R-Pi3 B+ supports the dual band processor 2.4GHz and 5GHz IEEE
802.11.b/g/n/ac wireless LAN which provides an high edge for the broadband developer community to test the RDK-B stack with Router, WiFi
functionalities.
Build Instructions and Flashing Procedure
RDK-B Raspberrypi - Host SetUp and Build Instructions
Hardware and Setup Information
RDKB RPI Setup Information
Note : RPI-3 B and B+ have same Build instructions and testing procedure
RDK-B Bootup Sequence
GwProvApp-Ethwan is the entry point for RDK-B stack middleware. It does all gateway initialization as above
Responsible to initiate the registration of all services on boot -up. Responsible for all provisioning of LAN,FIREWALL(iptables),BRIDGE,etc
GwProvApp-EthWan is specifically designed for Ethernet only Input feed for WAN Network Connection(i,e erouter0)
Router Profile Test Bed using RPI

Raspberry Pi 3 B+ Specifications

General

SoC	Broadcom BCM2837B0
CPU	1.4GHz 64-bit quad-core ARM Cortex-A53
GPU	Broadcom VideoCore IV
RAM	1GB LPDDR2 SDRAM
Bluetooth	Bluetooth 4.2, BLE
USB Ports	4 x USB 2.0
GPIO	40-pin GPIO header
Audio Output	3.5mm jack, HDMI
Camera Interface	CSI camera port
Display Interface	DSI display port
Storage	microSD
Operating Temperature	0°C to 50°C
Networking	2.4 GHz and 5 GHz IEEE 802.11.b/g/n/ac wireless LAN
Video Output	HDMI, Composite video
Power	5V/2.5A DC via microUSB
Dimensions	85.6 mm × 56.5 mm

Summary

Introduction to RDK-B on Raspberry Pi

RDK-B Overview and Hardware

Describes the Raspberry Pi 3 Model B+ and its suitability for RDK-B testing with WiFi functionalities.

RDK-B Build and Setup Procedures

Build Instructions and Flashing

Guide for setting up the host environment and flashing RDK-B onto the Raspberry Pi.

Hardware and Setup Information

Details on RDKB RPI setup, noting build instructions are the same for RPi 3 B and B+.

RDK-B Bootup Sequence and Core Components

RDK-B Bootup Sequence Diagram

Visualizes the systemd and event handler registration during RDK-B boot.

RDK-B Middleware Initialization

Explains GwProvApp-Ethwan's role in RDK-B initialization and service registration.

RDK-B Router Functionality and Test Bed

Internet Connectivity Use Case

Detailed steps for connecting wired and wireless clients to the internet via RDK-B on RPi.

Supported Wireless SSIDs

Default SSID names and passwords for 2.4GHz and 5GHz WiFi bands on RDK-B.

RDK-B Supported Features and Documentation

List of Supported Features

Enumerates features like DHCP, Device Management, Parental Control, Firewall, and WPS.

Supported Features User Manuals

References user manuals for specific RDK-B features such as WiFi Management and MAC Filtering.

Additional Resources and Yocto Support

Additional Links

Provides links to RDK-B components documentation and Utopia basic routing features.

Yocto Modification for RDK B+ Support

Details on kernel and firmware modifications for RDK B+ support in Yocto build.