To Next PageTo Next PageWhat to do if the Rath Conference System software says the device is offline?
If the Rath Conference System software indicates that the device is offline, first ensure that the Controller has a stable and valid internet connection. If the problem persists, try unplugging the Ethernet cable from the Controller and then plugging it back in.
What to do if the Rath Conference System software says invalid SmartView ID?
If the Rath Conference System software displays an invalid SmartView ID error, double-check that you have entered the ID correctly.
General| Brand | Rath |
|---|---|
| Model | Janus SmartView Visual |
| Category | Conference System |
| Language | English |
Specifies power sources (12v, 24v, PoE) and internet/wireless data device needs.
Lists essential components: SmartView Controller, Display, and Camera.
Mentions the necessity of YES/NO buttons and a laptop for setup.
Details mounting locations for Controller and Camera, plus connections for display and buttons.
Covers connecting the Controller to the network via Ethernet and applying input power.
Describes using the provided flash drive to access the SmartView link.
Covers entering IDs, viewing camera feeds, sending messages, and testing multiple IDs.
Explains how to access previous sessions, search by ID, and play recordings.
Addresses blank displays and offline device errors with verification and reconnection steps.
Provides solutions for invalid ID messages, focusing on correct entry.
Illustrates setup using Ethernet extenders for machine room and elevator car components.
Presents a detailed wiring example and schematic for connecting the SmartView system components.
Guides on connecting the SmartView Controller with a CE Elite PI Display via RS485/422.
Details initial setup for the Head-End, including connecting to the internet and linking IDs.
Ensures operation by verifying Head-End and Controllers wire back to the same network switch.
Provides detailed power, operating temperature, and dimension specifications for system components.
Lists specific part numbers for various SmartView display models.
Contains an example ID table and a template for custom SmartView ID and location entries.
