Rath SmartPhone VI Standard Operations

Keypad Programming
Remote Programming (Recommend using a Landline phone)
N56 W24720 N. Corporate Circle Sussex, WI 53089
800-451-1460 262-246-4828 (fax) www.rathmicrotech.com
06/15
Made in the USA
3 Year Warranty
RP8200910
Revision 6
Step 1. Begin Program Mode
A. Press Enter
Step 2. Program Emergency Numbers
A. Press 1, Enter, (Phone Number), Stop
To Program numbers 2-5, repeat Step 2 a.
Step 3 . Program Location Message
A. To Turn On Message Press 1, 3, Enter, 2
B. Press 6, Record, (Wait for the Beep, Speak Your
Message), Stop
(To Replay Message Press 6, Play/Pause
)
C. Program Frequency of Message Press 1, 3, Enter, _
0= Turn Message Off
1= Plays Message (1) Time
2= Plays Message (2) Times (Default)
3=
Plays Message Until Receiving Party Presses * On Their Phone
Step 1. Begin Program Mode
A. Call Into Phone
B.
After 1st Simulated Ring Press #, #
C. Key in Security Code (Default is 1111 )
Step 2. Program Emergency Numbers
A. Press 1, * (Phone Number), *, #
Step 3 . Program Location Message
Program Talk Timer (Default is 5 minutes, ring down is 3 minutes)
Keypad: Press 8, Enter, (3 Digit Number in Minutes)
Ex: 2 Minutes = 002
Note: After Talk Timer Expires, Phone Will Prompt Called
Party to Extend Call for 3 Minutes
Step 4. To Exit Program Mode
A. Press *, #, 0 (You Will Hear Beep, Beep) *, #
(Detailed Programming Instructions)
Standard Operations
SmartPhone VI
Phone Line Check (Default is 10 minutes)
Keypad: Press
3, 4, Enter, (4 Digit Number in HH:MM)
Ex: 20 Minutes = 0020; 10 Hours = 1000
SmartPhone VI Consolidator Feature (Capability of 10 Phones/One Line)
A. Press 7, Enter
B. Press *, 1-5 For Corresponding Elevator (1-5)
Step 1. Begin Program Mode
A. Press Enter
Step 3. Program ID Numbers for Phones 6-10
A. Press 7, Enter
B. Press #, 1-5 For Corresponding Elevator (6-10)
Step 2. Program ID Numbers for Phones 1-5
Step 5. Confirm Consolidator Operation
A. Dial Phone Number SmartPhones connected to:
All Phones Will Answer
B. To Select Individual Phone
Step 4. Program Emergency Numbers
A. Press Stop For 3 Seconds
Press *1 (Phone #1) Press #1 (Phone #6)
Press *2 (Phone #2) Press #2 (Phone #7)
Press *3 (Phone #3) Press #3 (Phone #8)
Press *4 (Phone #4) Press #4 (Phone #9)
Press *5 (Phone #5) Press #5 (Phone #10)
Press *0 (All Phones)
A. To Turn On Message Press 1, 3, *, 2
B. Press 6, *, (Wait for the Beep, Speak Your Message), #
(To Replay Message Press
6, #
)
C. Program Frequency of Message Press 1, 3, *, _
0= Turn Message Off
1= Plays Message (1) Time
2= Plays Message (2) Times (Default)
3=
Plays Message Until Receiving Party Presses * On Their Phone
Remote:
3, 4, *, (4 Digit Number in HH:MM)
Step 4. To Exit Program Mode
A. Press Stop
For 3 Seconds
Note: Consolidator mode allows you to have up to (10) SmartPhones on a single telephone line and toggle between
them from an outside call.
Example: To Program Emergency Number 2,
Press 2, Enter, (Phone Number), Stop
Note: If installed on a ring down line (no dial tone) do not
program a phone number. Press the following 1, 9, Enter, 2
(automatically sets the timer for 3 minutes)
To turn off press: 2 3 Enter 3 2 3 Enter 7284 1 1 Enter 2
To Program numbers 2-5, repeat Step 2 a.
Example: To Program Emergency Number 2,
Press 2, * , (Phone Number), *, #
Note: If installed on a ring down line (no dial tone) do not
program a phone number. Press the following 1, 9, * , 2
(automatically sets the timer for 3 minutes)
To turn off press 2 3 * 3 2 3 * 7 2 8 4 1 1 * 2
For a Pause press “ # , ”
*
Optional Programming Features
Remote:
8, * , (3 Digit Number in Minutes)
Press
Press
Note: Called party can replay message by pressing * , *

Rath SmartPhone VI Specifications

General

Brand	Rath
Model	SmartPhone VI
Category	Conference System
Language	English