6
Press and hold for three seconds to clear the current count session.
Press to start or stop the count.
(X only): Press and hold for three seconds to activate Face sorting. Run a stack of bills though the machine
while Face sorting is activated, and the stack will be sorted into two stacks, one face up and one face down, which
can be combined to all face the same way. Press and hold for another three seconds to activate Orientation
sorting. When you run a stack of bills though the machine while Orientation sorting is activated, the stack will be
sorted into two stacks, one with the face upside-down and one right side-up, which can be combined to all face
the same way. Press and hold for another three seconds to turn Face and Orientation sorting o.
• Press and hold for three seconds to print your count results (RTP report printer sold separately).
• Press and hold for three seconds to print the serial numbers of the count (RTP report printer sold
separately).
• Press and hold for three seconds to disable/enable the auto-start feature.
• Press and hold for three seconds to adjust the speed setting. Select your desired speed from the options
displayed on the touchscreen.
Setting Date/Time
. Press and hold for three seconds to enter the maintenance menu.
. Press the arrow keys until “TIME SET” is highlighted, then press to enter the clock menu.
. Use the arrow keys to highlight the year, month, day, hour or minute, and use the numeric keypad to make
any necessary changes.
. Once the date and time are set, press twice to return to the default count screen.
Control Panel (continued)
To Next Page
Loading...
Need help?
General
