INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 35 of 60
RAVAGLIOLI S.p.A.
7300-M018-2_R
G8945.26 - G8945IT.26 - G8945V.26 - G8945ITV.26 - G8945V.26S - G8945ITV.26S - G8945D.26 - G8945ITD.26 - G8945D.26S - G8945ITD.26S
LIFTING DEVICE
(only for G8945V.26S - G8945ITV.26S - G8945D.26S - G8945ITD.26S models)
No movement is produced when
the control pedal is operated.
1. Supply missing or insufficient.
2. The supply pipes have not been
correctly assembled.
3. The control valve is not working.
1. Check supply.
2. Check pipes fitting.
3. Call for technical as-
sistance.
When the machine is aired, the lift-
ing device tends to move, with no
consent by the operator.
When the lifting device is fixed to
the machine, the spool that con-
nects the pedal to the valve has lost
its settings.
Re-calibrate the control valve rod
slackening the nut between the rod
and the fork and turn the rod in
cw or ccw direction until restoring
the correct functioning.
ROTATING BEAD DEPRESSING ROLL PLUS91AKC
(only for G8945V.26S - G8945ITV.26S - G8945D.26S - G8945ITD.26S models)
No movement is generated when
the control lever is operated.
1. Supply missing.
2. The supply pipes have not been
correctly assembled.
3. The control valve is not working.
1. Check supply.
2. Check pipes fitting.
3. Call for technical as-
sistance.
When the control lever is operated
movement arises in one direction
only.
The control valve is not working. Call for technical assis-
tance.
To Next Page
Loading...
Need help?
General
