72
0472-M013-5
15
ContenutodelladichiarazionediconformitàCE_RAV_sollevatori_autocertificazione.docx
Content of the EC declaration of conformity (with reference to point 1.7.4.2, letter c) of directive
2006/42/EC)
With reference to annex II, part 1, section A of directive 2006/42/EC, the declaration of conformity
accompanyingthemachinerycontains:
1. the business name and full address of the manufacturer and, where applicable, its authorised
representative;
Seethefirstpageofthemanual
2. nameandaddressofthepersonauthorisedtocompilethetechnicalfile,whomustbeestablished
intheCommunity;
Itcoincideswiththemanufacturer,seethefirstpageofthemanual
3. descriptionandidentificationofthemachine,includinggenericname,function,model,type,serial
number,tradename;
Seethefirstpageofthemanual
4. astatementexplicitlydeclaringthatthemachineryisinconformitywithalltherelevantprovisions
of this directive and, where appropriate, a similar statement declaring conformity with other
community directives and/or relevant provisions with which the machinery complies. These
referencesmustbethoseofthetextspublishedintheOfficialJournaloftheEuropeanUnion;
ThemachinerymustcomplywiththefollowingapplicableDirectives:
2006/42/EC MachineryDirective
2014/30/EU ElectromagneticCompatibilityDirective
2014/35/EU LowVoltageDirective
5. whereappropriate,thename,addressandidentificationnumberofthenotifiedbodywhichcarried
outtheECtype-examinationreferredtoin annexIXandthenumberoftheECtype-examination
certificate;
N/A
6. where appropriate, the name, address and identification number of the notified body which
approvedthefullqualityassurancesystemreferredtoinannexX;
N/A
7. where appropriate, referenceto the harmonised standardsreferred to in article 7,paragraph 2,
whichhavebeenapplied;
UNIENISO12100:2010 Safety of machinery - Generalprinciplesfor design - Risk
assessmentandriskreduction;
UNIEN1493:2010 Vehiclelifts;
IECEN60204-1:2006/AC:2010 Safety of machinery - Electrical equipment of machines -
Part1:Generalrequirements
8. whereappropriate,referencetootherstandardsandtechnicalspecificationsapplied;
N/A
9. placeanddateofdeclaration;
SassoMarconi, / /
10. identificationandsignatureofthepersonauthorisedtodrawupthedeclarationonbehalfofthe
manufactureroritsauthorisedrepresentative.
TheManagingDirectorofRavaglioliS.p.A.MrGiulioCurreli