1 © 2010 Newton Crouch Inc. This information is the property of Newton Crouch Inc. and is loaned confidentially for the sole use of our customer. It must not be
used in any way detrimental to our interest or shared with outside parties. Technical Tips/Raven—SCS 660 Programming Instructions revised Rev 2.27.18
There is no substitute for understanding your equipment’s
specifications, instructions and capabilities.
Do NOT try to modify or lengthen any of the 3
Speed Sensor or Encoder cables. Please call
Newton Crouch Inc. for extension cables
ALWAYS disconnect battery from console prior
to jump starting, welding, or charging battery.
To Next Page
Need help?
General
