Raven viper 4+ - Page 5

5
Next you will need to enter your applicaon rate. Click
on the buon under the Rate Mode to enter the rate.
Enter your desired rate on the number pad, and then
hit the Green Check to save it.
Double check your Job Name, Scout Group, and
Applicaon Rate. Hit the green start buon once
everything is correct.
There is one more step required before starng your
spray applicaon. You will need to touch and hold the
Individual Product Control widget unl the Product
pop-up window appears.
The default posion for this widget is in the ‘O’
posion. Touch the buon under the word ‘Auto’ to
change your product control to automac.
Then hit the green arrow at the top right of the pop-up
window.