Raven viper 4+ - Running a Self Test

7
Secon 3 Running a Self Test
(Note: You need to be in a Job to run a self test.)
Touch and hold the GPS Status widget.
The GPS Status (Health) screen will open up.
Touch the number eld to the right of ‘Test Speed’
near the boom le of the GPS Health screen.
When the number pad opens up enter your test speed
and then hit the green check.
The GPS Health screen will show the speed you
entered.
(Note: When the vehicle moves the test speed will be
return to 0 and the sprayer will revert back to actual
speed.)