Rawling 12108 - Programming Positions; Setting the open door position; Setting the closed door position

49
NO
SE
FI
GB
DE
DK

Hold the P button in for approximately 8
seconds.
The door opener emits a sound, and “1”
appears on the display to indicate that you
are in menu 1.
Press the P button. “1” flashes on the display.
Press on the + and – buttons to raise or
lower the door. Move the door forward until
it is fully open.
Press on the P button to continue to the
next point.

Press the – button. “2” appears on the
display.
Press on the P button. “2” flashes on the
display to indicate that you are in menu 2.
Press on the + and – buttons to raise or
lower the door. Move the door forward until
it is fully closed.
Press on the P button to continue to the
next point.