EasyManua.ls Logo

Rawling 12108 User Manual

Rawling 12108
67 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Brugsanvisning
Bruksanvisning
Bruksanvisning
Käyttöohje
Instruction manual
Gebrauchsanweisung
DK
NO
SE
FI
GB
DE
Model 12108
Question and Answer IconNeed help?

Do you have a question about the Rawling 12108 and is the answer not in the manual?

Rawling 12108 Specifications

General IconGeneral
BrandRawling
Model12108
CategoryGarage Door Opener
LanguageEnglish

Summary

REMOTE-CONTROLLED GARAGE DOOR OPENER

Introduction

Guidance on reading instructions and safety regulations for optimal use.

Main components

Lists and identifies all parts of the garage door opener system.

Technical specifications

Details electrical and physical parameters like voltage, output, and dimensions.

Special safety instructions

Critical warnings regarding water exposure and installation limitations.

Assembly

Laying out the rail

Steps for unpacking, unfolding, and preparing the door opener rail.

Installing the door opener

Instructions for attaching the motor casing to the rail using brackets.

Installation and Preparation

Mounting Components

Describes securing ceiling, wall brackets, and attaching the lifting arm.

Pre-use Preparation

Steps for programming the opener and connecting it to mains electricity.

Programming Positions

Setting the 'open door' position

Procedure to define the fully open limit for the garage door.

Setting the 'closed door' position

Procedure to define the fully closed limit for the garage door.

Advanced Programming Settings

Testing resistance

Procedure to test and set the force resistance for the door.

Adjusting sensitivity

How to set the sensitivity level for the door's operation.

Configuration Options

Selecting a remote control

Steps to register or manage remote controls for the opener.

Setting the alarm function

How to enable or disable the audible alarm for door status.

Operational Settings

Setting automatic closure

Configuring the time delay for automatic door closing.

Setting the maintenance signal

Enabling reminders for required door opener maintenance.

Programming and Use

Completing programming

Final steps to save all configured settings for the opener.

Registering a remote control

Procedure to pair a new remote control with the opener.

Cancelling a remote control

Procedure to remove a paired remote control from the opener.

Using the door opener

Instructions for operating the door and its light via the remote.

Maintenance and Troubleshooting

Manual opening

How to operate the door manually during a power failure.

Cleaning and maintenance

Guidelines for cleaning the opener and lubricating moving parts.

Troubleshooting common issues

Diagnosing and resolving problems like door not moving or jerky operation.

Service and Compliance

Service centre information

Contact details for support, complaints, and part replacements.

Declaration of compliance

Statement of conformity with relevant standards and directives.

Environmental Information

Product environmental compliance

Information on environmentally friendly manufacturing and substance compliance.

Consumer environmental responsibility

Advice for consumers on proper disposal and battery removal.