53
NO
SE
FI
GB
DE
DK
Press the + button to select menu 1, and
then hold the P button down until “0”
appears on the display.
This point must be followed in order to save
the settings you have made.
Hold the S button down.
“00” appears, and then “0” appears on the
display.
Press the button at the bottom of the
remote control twice.
The remote control is now registered.
Hold the S button down.
“0” appears on the display.
Release the S button when the display is
blank.
The remote control is now cancelled.
Open and close the door by pressing the
button at the bottom of the remote control.
Switch the light on and off by pressing the
button at the top of the remote control.
If you have switched the alarm function
on, a signal will sound after a brief period
to remind you to close the door. Close the
door, or switch the alarm off on the remote
control.
To Next Page
Loading...