Need help?Do you have a question about the Rayco RG165T-R and is the answer not in the manual?
Crucial safety information, warnings about operating, maintaining, and repairing the machine.
Details required PPE like head, eye, hearing, hand, clothing, and foot protection.
Details severe injury risk from high-pressure fluid leaks and the need for immediate medical attention.
Covers fire hazards from fuels, lubricants, and electrical components, and prevention methods.
Warns against operating during electrical storms and staying clear of the machine.
Details pre-operation checks like clearing personnel/obstacles, window security, and calling 811.
Critical safety advice for operating on slopes, including terrain and equipment considerations.
Outlines procedures to safeguard against unexpected energy release during maintenance.
Critical advice on preventing trailer sway (whipping) and safe towing practices.
Details safe procedures for loading the machine onto a trailer, emphasizing operator controls.
Introduces the machine's key components and their locations for operator familiarity.
Lists critical pre-operation checks and recommendations for safe and economical machine use.
Provides step-by-step instructions and warnings for safely starting the engine.
Details the functions of various controls on the remote unit for operating the machine.
Step-by-step guide to safely and effectively remove stumps using the machine.
Provides instructions for safely stopping the machine, emphasizing the cutting wheel's rotation.
Outlines the preferred methods and precautions for transporting the machine on a trailer.
Describes how to expand or retract the machine's tracks for different operational needs.
Emphasizes proper engine maintenance and owner responsibility as per manuals.
Lists maintenance tasks categorized by service intervals (daily, hourly, yearly) for equipment care.
Explains how to use the service hour meter and calendar intervals to schedule maintenance.
Details essential checks to perform during a walk-around inspection for maximum service life.
Instructions for checking fuel level, filling, and draining the fuel tank safely.
Instructions for checking and filling the hydraulic oil level, stressing cleanliness.
Instructions for changing the spin-on hydraulic oil filter and its importance.
Discusses the importance of cutting teeth condition and replacement for efficiency and safety.
Step-by-step instructions for removing, cleaning, and reinstalling cutting teeth, including torque specifications.
Explains the daily lubrication procedure for cutter wheel bearings using high-temperature grease.
Details how to check and adjust the tension of the cutting wheel belt for optimal performance.
Explains how to check track tension and adjust it based on temperature and wear.
Steps for draining and replacing the oil in the track drive unit, including proper fluid and tightening.
Details specifications for engine oil, including classification and viscosity grades for break-in and normal use.
Specifies the type of diesel fuel to be used, emphasizing ultra-low sulfur content.
Lists recommended hydraulic oils, their specifications, and general properties for optimal machine performance.
Specifies the approved biodegradable hydraulic oil and its properties for use in the machine.
Recommends specific lubricating greases based on NLGI grade and temperature range for machine components.
Provides guidance on selecting appropriate oils and filters for cold weather operation and storage.
Recommends specific heavy-duty, low-silicate coolants suitable for diesel engines.
Outlines procedures for maintaining coolant levels, freeze points, and chemical additive concentrations.
Provides an overview of Rayco's warranty policy, exclusions, and coverage for the product.
Details warranty coverage for specific components like engines, hydraulics, batteries, and belts.
Lists specific items and conditions for which Rayco is not responsible under the warranty.
Explains the process for requesting warranty service from an authorized Rayco dealer.
To Next Page
General
